A cigar looks simple, leaf rolled around leaf, but smokers and makers use a precise vocabulary for what they see and feel, from the cap they cut to the ash that falls. This lesson gathers those words, with the Spanish names used in Cuba and in the other producing countries. Cigar Anatomy explains each part in depth, and Shapes & Sizes covers formats and measurements.
The parts of a cigar
From the end you smoke to the end you light, a cigar has a head, a body and a foot. The head (cabeza; in Cuba, perilla) is the closed end you cut and draw through. It is sealed by the cap, a small piece of wrapper that locks the wrapper in place. Cubans call the cap the gorro, while many smokers elsewhere call the cap itself the perilla. The shoulder is the curve where the head meets the body, and the body (cuerpo) runs from there to the foot (pie; in Cuba, boquilla), the open end you light. In tasting, body has a second meaning, how full the smoke feels, which the Strength vs. Body topic explains.
The band (anilla; in Spain, vitola) is the printed paper ring that names the brand. Many cigars carry a second, smaller band as well. Habanos adds one to its special releases, and makers elsewhere often put one near the foot to name a line or an anniversary.
Inside, a cigar is made of three kinds of leaf. The filler (tripa) at the core gives most of the strength and flavor. The binder (capote) holds the filler in shape, and the wrapper (capa), the outer leaf, gives the cigar its look and texture. The filler rolled in the binder, before the wrapper goes on, is the bunch (bonche). Each of the three can come from a different country: an Arturo Fuente Hemingway, for example, has an African Cameroon wrapper over Dominican binder and filler. A cigar whose three leaves all come from one country is a puro.
Long, short and mixed filler
Long filler (tripa larga) is whole leaves running the length of the cigar, and it is what premium hand-made cigars use. Short filler (tripa corta, sometimes called picadura) is chopped leaf and trimmings, used mostly in machine-made cigars. Mixed filler, sometimes called a Cuban sandwich, wraps chopped tobacco inside long-filler leaves.
How a cigar is made
Bunching is gathering the filler leaves and rolling them into the binder. How each filler leaf is folded first changes the way air moves through the finished cigar, and makers use three main methods.
| Method | How the filler leaves are prepared |
|---|---|
| Entubado | Each leaf is rolled into a tube, like a scroll, before the bunch is assembled |
| Accordion | Each leaf is folded into pleats, like the bellows of an accordion, and the leaves are then stacked |
| Book | The leaves are laid flat on top of one another and folded together, like a book |
Entubado is the hardest of the three, and it leaves air channels between the leaves. Book is the simplest and probably the most common method today.
Many factories in the Dominican Republic bunch with a Lieberman, a hand-cranked device that rolls the filler into the binder on a canvas; it is not used in Cuba. The bunches then go into wooden or plastic molds (moldes), held tight in a screw press (prensa), which set their shape. Every Cuban factory tests each pressed bunch on a draw machine, which checks the draw by suction before the wrapper goes on, and many factories elsewhere do the same.
The roller works on a wooden board, the tabla, and cuts the wrapper with a chaveta, a crescent-shaped blade. A casquillo, a small round cutter, cuts the piece of wrapper that finishes the cap, and goma, a flavorless vegetable gum, usually tragacanth, fixes the wrapper and cap in place. A guillotine cuts the finished cigar to its exact length, and the cepo, a wooden gauge with a hole for the ring gauge and a notch for the length, checks its size.
Heads and feet
Most cigars are finished with a flag and cap: a strip of wrapper, the flag, closes the head, and a small round cap is glued on top. The traditional Cuban finish is the triple cap, in which an extra teardrop-shaped piece is woven into the flag under the round cap, leaving three seams. A flag head is closed by the trimmed end of the wrapper alone, with no cap at all. A pigtail twists the flag into a curl on top, and it is the signature of the Cuban brand Trinidad.
At the other end, most cigars have a straight-cut foot that shows the filler. A tapered foot narrows to a small tip, as on a perfecto. A shaggy foot leaves the wrapper untrimmed beyond the filler and binder, and a closed, or covered, foot folds the wrapper over the end, fully or in part.
Shapes and sizes
A cigar's size and shape together are its vitola. A parejo has straight, parallel sides. A box-pressed cigar has been pressed into a squarish shape with flat sides, from a soft press that only flattens the sides a little to the sharp press of the Padrón 1964 Anniversary, which began the modern fashion for pressed cigars in Nicaragua in 1994. A pressed cigar is still a parejo.
A figurado is any cigar whose diameter changes along its length. The table compares the shapes you will meet most often.
| Shape | What it looks like | Example |
|---|---|---|
| Torpedo and pirámide | Tapers to a point at the head; the two names overlap and vary by brand | Habanos' Pirámide format, 156 mm × 52, popularly called a Torpedo |
| Belicoso | A short, rounded taper at the head | Cuba's Campana format, 140 mm × 52 |
| Perfecto | Tapered at both ends, often with a closed foot | The Arturo Fuente Hemingway cigars, made since 1983 |
| Salomón | A large perfecto with a small knob near the foot | Cuaba, a Cuban brand of double figurados launched in 1996 |
| Culebra | Three thin cigars braided together and tied, then untied and smoked one at a time | The Kafie 1901 Culebra, from Honduras |
| Chisel | A head pressed flat into a wedge | The signature shape of La Flor Dominicana, in the Dominican Republic |
A cigar's diameter is its ring gauge, measured in 64ths of an inch, so a 50 ring is 50/64 inch, about 19.8 mm. Habanos gives length in millimeters and most other makers in inches. In Cuba each size also has two names: a factory name, the vitola de galera, such as Mareva for a 129 mm × 42 cigar, and the name it is sold under, the vitola de salida, such as Petit Corona. Outside Cuba there is no shared list of factory names, and each brand names its own sizes. Shapes & Sizes lists the classic formats.
Draw
The draw (tiro) is how easily air passes through a cigar when you puff, and a good draw has light, even resistance. A cold draw is a gentle puff on the cut cigar before lighting, to test the draw and taste the unlit leaf. A tight draw is hard work and gives little smoke, usually because the filler is packed too tightly or the cigar has been kept too humid. A loose draw is too easy and makes the cigar burn hot and fast, usually because there is too little filler. A plug is a blockage, such as a folded leaf or a knot of filler, that stops almost all of the draw; a draw tool, a thin pick pushed through the head, can clear one near the cap.
Burn and ash
The burn line is the edge where unburned wrapper meets the ash, and it should move evenly around the cigar. Under the ash glows the coal, also called the cherry. When the ash falls, the coal usually stands in a slight cone, because the dense center of the bunch burns a little slower than the outside, and that is normal.
Three burn faults have names of their own. Canoeing is one whole side burning faster than the other. A runner is a single narrow streak of burn racing ahead along the wrapper. Tunneling is the center burning faster than the outside, leaving a hollow core inside an unburned shell. A touch-up, a gentle flame on the lagging part of the burn line, evens out most uneven burns. A relight is toasting and lighting a cigar again after it has gone out, and a purge, blowing gently through the cigar, clears stale, bitter smoke.
The ash tells you about the bunching. Firm ash comes from dense, even bunching, while flaky ash that falls early points to loose bunching. Mottled gray and black ash, called salt-and-pepper ash, is common and harmless.
The wrapper and the feel of a cigar
A good wrapper has a natural sheen from the leaf's oils, fine, flat veins, and tight seams where its edges meet. Some wrappers, most often Cameroon, have tooth: small bumps that are pockets of oil in the leaf and leave white specks in the ash. A barber pole, also called a candy cane or double wrap, winds two wrappers of different colors around the cigar in spiral stripes.
Two things can appear on a wrapper in storage, and they are easy to tell apart. Plume, or bloom, is a fine white powder that brushes off without leaving a mark, and it is harmless. Mold is fuzzy white, green or blue spots, usually at the foot or the cap, and it comes from storage that was too humid.
Pressed gently along its length, a well-made cigar feels firm but springy. Soft and hard spots point to uneven bunching. A spongy cigar has been kept too humid or has too little filler, and a brittle one has dried out and may crack.
