Cigarero

Filler Leaf Positions (Primings)

A priming is a leaf's position on the tobacco plant, and also one pass of the harvest, which picks two or three leaves at a time from the bottom of the plant up. The higher a leaf grows, the thicker, oilier, stronger and slower-burning it is, so filler is sorted into classes by position: volado, seco, viso (outside Cuba), ligero and, on a few plants, medio tiempo. Every class runs the full length of a long-filler cigar, so the blend is the same from the first puff to the last.

Two leaves from the same plant can be very different. A leaf near the ground grows in the shade of the leaves above it; a leaf near the top takes the full sun and stays on the plant longer. By the harvest they differ in thickness, oil, flavor, strength and the way they burn, and the whole system of filler classes is built on that difference. When a cigar's band says "ligero", it names a position on the plant, not a kind of seed.

Harvesting by primings

Most cigar tobacco is harvested by priming: picking the leaves a few at a time, usually two or three, from the bottom of the plant up as they ripen. The first leaves come off about 55 to 60 days after the seedlings are transplanted, and the pickers return every four to seven days, so that a plant is stripped in several passes over some weeks. The word priming also names a leaf's position: the first priming is the lowest leaves, the last the highest. The upper leaves ripen last; on one grower's farms in Estelí, Nicaragua, the ligero takes 15 to 20 days longer to mature than the leaves below it.

Growers shape the upper leaves before they pick them. Topping, called desbotonar in Cuba, removes the flower bud so that the plant's energy goes into its leaves, and the upper leaves gain the most from it. The lower the plant is topped, the fewer leaves it carries and the more each one gains, so a grower who wants strong ligero gives up some of the crop to get it. That is a hard bargain for farmers who sell their tobacco by weight, although ligero's thickness and oil make each leaf heavier and win back part of the loss. Topping and Suckering and Priming and Harvesting, in the Tobacco Farming topic, cover both jobs.

The classes of filler leaf

The higher a leaf grows, the more sun it receives, the thicker and oilier it becomes, the more nicotine it carries and the more slowly it burns. The trade sorts filler into classes by position. The table runs from the bottom of the plant to the top and gives each class's number in the Cuban system.

LeafWhere it growsIn CubaWhat it brings to the blend
VoladoThe lowest leavesFortaleza 1Light flavor and an easy burn; it keeps the cigar alight
SecoThe middle of the plantFortaleza 2Medium flavor and most of the aroma
VisoBetween seco and ligeroNot a Cuban classMore depth than seco, less power than ligero
LigeroThe upper leavesFortaleza 3Dark, oily and slow to burn; most of the strength and much of the body
Medio tiempoThe top two leaves, on some plants onlyFortaleza 4The fullest flavor; rare and used sparingly

Read from top to bottom, the table runs from the mildest, easiest-burning leaf to the strongest and slowest. Each class has its job. Volado adds little flavor, but it burns so readily that a blender uses it to keep heavier leaves alight; Habanos values it above all for that. Seco carries the aroma and is the heart of most blends. Ligero brings the strength and much of the body, and its name, Spanish for "light", is an odd one for the strongest leaf. Viso, thinner than ligero and thicker than seco, lets a blender add depth without adding much power.

Cuba and the other countries

The names change a little between countries. In Cuba the filler classes are called tiempos or fortalezas, "strengths", and numbered 1 to 4: volado, seco, ligero and medio tiempo. Viso is not among them. It is a name used mainly in the Dominican Republic, Nicaragua and Honduras, for leaves stronger than seco but gentler than ligero. Some makers divide the classes further, into viso seco and viso ligero, and the Illusione Epernay, made in Nicaragua, was blended from those two without any ligero at all.

Outside Cuba, makers often name a filler leaf by its variety or region and its class together. Davidoff, for example, describes the Dominican filler of its Grand Cru No. 3 as Piloto Seco, Olor Seco and San Vicente Visus, visus being another form of viso, and the filler of its Winston Churchill The Late Hour adds Estelí Visus and Condega Visus from Nicaragua. In names like these, the first word tells where or from what seed the leaf grew, the second where on the plant.

Some growers call the topmost leaves of the plant the corona, the crown, which sits above the ligero, never below it.

Medio tiempo

Medio tiempo, "half time", is the rarest filler leaf. Despite its name it does not grow in the middle of the plant but at the very top: Habanos describes it as the fullest-flavored leaf, found only among the top two leaves of a sun-grown plant, and it grows on perhaps one plant in ten. Its rarity means it is used very occasionally, to add intensity. The Cohiba Behike, launched in 2010, was the first Cuban line to include it, as one of the six leaves in every cigar, and the heavy leaf suits the line's thick sizes. Some makers treat the name as little more than a label for the thickest ligero.

From the field to the bale

Not every leaf makes the grade. In Cuba, only about half of the leaves on a sun-grown plant are good enough to be classified as volado, seco, ligero or medio tiempo, or chosen as binder. The upper leaves also need longer at every stage after the harvest. In Cuba, sun-grown leaf cures in the barn for at least 50 days, longer for the leaves from the top of the plant. Its final fermentation lasts 15 to 25 days for volado, 45 to 60 days for seco and about 90 days for ligero and medio tiempo, and ligero and medio tiempo then age in bales for at least two years, the longest of any filler. Curing & Fermentation follows these stages in detail.

How the classes shape a cigar

A blender sets a cigar's character largely by the proportions of the classes. More ligero makes a cigar stronger and fuller; more seco makes it more aromatic and gentler; volado keeps it burning. Strength looks at how much ligero blenders use, and Combustion at how the classes burn together.

The classes also explain how a cigar is built inside. Because ligero burns slowly, rollers place it at the center of the bunch, with seco and volado around it, and every leaf runs from the foot to the head. A common explanation of why cigars grow stronger toward the end, that the ligero "comes through" in the final third, does not fit this construction: the ligero is there from the first puff. What changes is the smoke, which grows hotter and more concentrated as the cigar shortens, while nicotine collects in the tobacco ahead of the burn and in the smoker. Cuban rollers add one refinement, laying every leaf with its lighter-flavored tip toward the foot so that the flavor intensifies as the cigar burns. How Strength Builds During the Smoke, in the Strength vs. Body topic, explains the whole curve.

Log in to save this lesson as read and build your topic progress.

Log in
Lesson 5 of 8 · 14 min readSingle-Origin vs Blended FillerA single-origin filler comes from one country, sometimes from one region, one farm or one harvest; a cigar whose wrapper, binder and filler all come from one country is a puro, and every Habano is one. A blended filler combines leaf from several countries or regions, each chosen for what it adds. Seed, soil and climate make filler from Estelí, the Cibao Valley, Jamastrán, San Andrés, Bahia or Peru taste different, and blenders use those differences.Next lesson