Transplanting is the most dangerous moment in a tobacco plant's life. A seedling raised in the sheltered conditions of a bed is pulled up, carried and set in open ground, and for a few days it does little but survive. This lesson covers how growers tell that a seedling is ready, how they harden it, pull it and carry it, how it is set in the ground and what happens in its first days. Nurseries and Seedbeds covers raising the seedlings; Plant Spacing and Field Layout and Manual vs Mechanized Farming, in the Tobacco Farming topic, cover the field layout and the planting machines.
When a seedling is ready
Growers judge a seedling by its size and its stem. Cuba's technical guidance for seedbeds asks for seedlings 13 to 15 centimeters tall with a stem 3 to 5 millimeters thick for planting by hand, and 19 to 21 centimeters with a stem 5 to 7 millimeters thick for planting by machine; they must be free of disease and have plenty of roots. In a 2019 trial in San Juan y Martínez, seedlings of Corojo 2006 were transplanted 45 days after sowing, at about 16 centimeters, with about five leaves. The U.S. guide of 1908 to shade tobacco in Connecticut gave a similar rule: a plant should not be pulled until its stem is at least four inches (10 centimeters) long and almost as thick as a common lead pencil.
The table compares the readiness figures from these sources.
| Where | Height | Stem | Age |
|---|---|---|---|
| Cuba, for planting by hand | 13 to 15 cm | 3 to 5 mm thick | From 35 to 40 days; the bed is used up by 60 to 65 days |
| Cuba, for planting by machine | 19 to 21 cm | 5 to 7 mm thick | |
| Jalapa, Nicaragua (2018) | 10 to 12 cm | About 30 days | |
| Connecticut shade, 1908 | Stem at least 10 cm long | Nearly as thick as a pencil | 40 to 60 days |
| Kentucky and Tennessee, float trays | 7 to 10 weeks |
The figures agree more than they differ: a seedling of about 10 to 15 centimeters with a sturdy stem, a month to two months old. A plant set out by machine needs to be larger and stiffer to be gripped and planted at the right depth, which is why the Cuban rule asks more of it. Seedlings can also grow too large: the 1908 guide warned growers not to let their plants get too big before transplanting, and a Cuban bed that has stood more than 60 to 65 days has passed its best.
Hardening the seedlings
A seedling raised in a damp, sheltered bed has to be toughened before it faces the field. Clipping does part of the work. In Cuba the whole bed is clipped once, when about one seedling in ten is ready, and float plants in Kentucky and Tennessee are clipped four to six times, which toughens them, thickens their stems and makes them more even. Growers also ease off the water and give the plants more air. The 1908 guide advised watering more sparingly and airing the bed more often once the plants were about an inch high, and Cuban guidance for seedbeds in general stops the regular watering two or three days before the seedlings are pulled and gives the bed a light watering the day before, so that the roots come out of the soil easily.
Pulling and carrying
Seedlings are pulled from a wet bed. The 1908 guide told growers to wet the bed thoroughly first, so that the roots would come up easily, and to pull each plant by its leaves rather than its stem, so as not to damage the bud. Not every plant is ready at once. The largest are taken first, carefully, so that the smaller ones can grow on for the next pulling, and in Cuba a bed is pulled every two or three days for as long as it has good seedlings. Cuban guidance counts the pullers among the skilled workers of the seedbed, because pulling damages roots, and a seedling with damaged roots needs time to recover in the field.
Once pulled, the seedlings are kept upright, shaded and moist. Connecticut growers stood them roots down in shallow boxes to cart to the field. Cuban guidance for seedbeds advises pulling in the morning, after the dew has dried, and covering the bundles against the sun on the way to the field. Plants bought from far away are a risk, because they can bring diseases with them, as Nurseries and Seedbeds explains.
Setting the plants
How a seedling goes into the ground varies with the country and the farm. In Pinar del Río the usual method, and the only one used for shade-grown wrapper, is planting al dedo: a worker sets each seedling by hand in a furrow that has just been filled with water, as Plant Spacing and Field Layout describes. In Nicaragua, growers plant by hand into holes made at the right distance, setting each plant upright and filling the hole with loose soil, or use machines that plant two or more rows at a time. Connecticut planted by machine as early as 1908, with a horse-drawn transplanter that opened a furrow, gave each plant about a cupful of water and closed the soil around it; only the rows beside the shade tent's posts were planted by hand.
Machines need the right plant. Kentucky's growers find that some transplanters struggle to set small plants deep enough, and Cuba's guidance asks for larger seedlings for mechanized planting. In Kentucky and Tennessee, a fungicide is often added to the water given at transplanting to protect Connecticut Broadleaf against black shank and the root rot Pythium, though the guidance is firm that Broadleaf should never be planted in a field with any history of black shank at all.
The first days
The 1908 guide called transplanting a hard ordeal for the plants, but added that if the land was well prepared, the plants were set well in water and the weather was kind, very few would die. Insects take some: cutworms cut the young stems at the soil, and wireworms bore into them, and Connecticut's station noted in 1934 that plants attacked soon after setting often never recovered. Three or four days after planting, the 1908 guide advised, the field should be walked and fresh plants set wherever any had died or were missing, because a full stand of plants is the basis of a good crop. After that the field work begins: drawing soil up around the young plants and then the aporque, as Plant Growth Stages, in the Tobacco Farming topic, describes.
