A tobacco leaf leaves the field green, heavy and harsh, and no cigar is made from it in that state. Two groups of workers change it: those who cure it in the barn, and those who ferment it in piles. This lesson follows the work of both, and it points to the Curing & Fermentation topic for the barns, the piles and the chemistry, which that topic covers in full.
The curing workers
Curing is the slow drying of the leaf in a barn, the casa de tabaco. Workers sew the freshly picked leaves onto string, the ensarte, hang them in pairs over poles called cujes, and then keep the barn's doors and vents open or shut as the weather changes, so the leaf dries slowly and evenly rather than green or rotten. They judge how the cure is going by touch and by sight: an experienced worker can follow the change of the leaf from green to yellow to brown, and knows the cure is done when the thick central vein snaps when bent. When the time comes to take the leaf down, the zafado, it is done in the morning, once the night air has softened it enough to handle without cracking. Curing Barns, Color Transformation and Moisture Control, in the Curing & Fermentation topic, describe the barn and what happens inside the leaf.
The fermentation workers
Cured leaf is still too harsh to smoke, so it is fermented. Fermentation workers moisten the leaf and build it into pilones, piles that commonly weigh a tonne or more and heat up on their own as the leaf's enzymes and its microbes work. The worker's job is to keep that heat even. A long thermometer is pushed into the center of the pile and read every day, and when the heat reaches the limit set for that leaf, the whole pile is taken apart by hand and rebuilt, the leaves moved from the outside to the inside and the bottom to the top. If the pile stays too cool, the fermentation stalls and the ammonia stays trapped in the leaf; too hot, and the leaf can be scorched. Pilon Building and Fermentation Monitoring and Timing, in the Curing & Fermentation topic, describe both crafts.
Where the work is done
The setting differs by country. In Cuba the grower runs the first fermentation in the curing barn, and the state's sorting and stripping houses take over from there: the escogida, where the leaf is moistened, aired and sorted into its classes and where the wrapper ferments, and the despalillo, where binder leaves are stripped of their midrib, filler leaves are part-stripped, and both are fermented again. In Nicaragua, the Dominican Republic and Honduras, the large makers own their own farms and warehouses, so the cured leaf travels from barn to warehouse in bales, and sometimes crosses a border to ferment: the Oliva family ferments the wrapper it cures in Ecuador in its plant in Estelí, Nicaragua. Fermentation Rooms, in the Curing & Fermentation topic, describes these places.
The working conditions
A fermentation room is a demanding place to work. It is large, warm and damp, with the pilones standing in rows, and the air smells sharply of ammonia, most of all when a pile is opened. Moving the leaf with the pile is heavy work, done by hand, and turning a pile that weighs over a tonne means lifting the same leaves again and again through the season. The tables in the Curing & Fermentation topic give the temperatures these rooms and piles run at, and Ammonia Release, in that topic, explains the smell.
