Lessons
- 1Bunching the Filler13 min readThe filler (tripa) is not stuffed into a cigar but gathered and folded by hand, then rolled into the binder to form the bunch (bonche), the cigar as it stands before its wrapper. The bunch starts from the blender's recipe and from the way each leaf is folded into the bunch, which decides where the air will travel when the cigar is smoked, and so how freely it draws and how evenly it burns. In Cuba one roller makes the whole cigar, while elsewhere a buncher and a roller usually split the work; where a hand-cranked device rolls the bunch, that is a factory's or a maker's choice for particular cigars, not a habit of any one country.
- 2Binder and Wrapper Application12 min readOnce the filler is bunched, it is rolled in the binder (capote), a sturdy, elastic leaf whose looks do not matter because the wrapper will cover it, and then in the wrapper (capa), the costliest leaf in the cigar, graded for color, elasticity and appearance and stretched around the bunch in a spiral. The wrapper ends at the head (cabeza, perilla in Cuba), which is closed with a cap, and at the foot (pie, boquilla in Cuba), which is cut to length. The seam, the cap and the match of color are where a roller's care shows most plainly.
- 3Pressing and Finishing12 min readA freshly rolled cigar is damp and soft, so before it is boxed it is pressed in a wooden mould to set its shape, tested for draw by suction, checked for length, ring gauge and weight, and rested in a conditioning room so it sheds the moisture taken on in rolling. It is then graded by color, banded, and boxed, outside Cuba often in cellophane. Cigars that fail any check are rejected, and because Cuban rollers are paid by the piece, rejections are taken out of the roller's quota.

